Kreg CT6066 Screw Gun & Hose Set for Framing Table Bedienungsanleitung PDF herunterladen

Screw Gun Kit

Assembly Instructions

Locate the 1/4” NPT pipe plug on the lower right

hand side of the main rail. Remove the pipe plug

using a 1/4” allen wrench. Once the pipe plug is

removed, thread one of the supplied ﬁ ttings into the

hole. (Note: Thread sealer is already applied to the

ﬁ tting, no other sealant should be needed. Tighten

the ﬁ tting using a 11/16” socket or wrench. Do not

over tighten!)

Remove the screw gun from the box and locate the

black plastic (see Fig. 1)

cap on the bottom of the

handle of the screw gun.

Remove this cap and

install the second air ﬁ tting

supplied with this kit into

the screw gun using a

11/16” socket or wrench.

Once both ﬁ ttings are tight, install the blue

ﬂ excoil hose to both the main rail and the gun.

This is done by simply pushing the hose into the

ﬁ tting until you feel it seat in the ﬁ tting. Now install

the 6” driver into the gun and you are ready to start

using your screw gun.

Pipe plug where the hose and gun will attach.

Hose and gun attached to the main rail.

Item# CT6066

Screw Gun

Hose ﬁ ttings

Coil Hose

Tools Needed:

• 1/4” Allen Wrench

• 11/16” Socket or Wrench

Kit Contains:

• (1) Screw Gun

• (1) Coil Hose

• (2) Hose Fittings

• (1) 6”, #2 Square Driver

• (1) Screw Gun Operating Instructions

Fig. 1

If you have any questions regarding these

instructions, please call 1.800.447.8638.

5/2010 CT6065

Rev B

WARNING: This product contains one or more

chemicals known to the State of California to cause

cancer and birth defects or other reproductive harm.

Wash hands after handling.

Screw Gun Kit 1

Inhaltsverzeichnis

Seite 1 - Screw Gun Kit

Screw Gun KitAssembly InstructionsRLocate the 1/4” NPT pipe plug on the lower right hand side of the main rail. Remove the pipe plug using a 1/4” alle

Kommentare zu diesen Handbüchern

Keine Kommentare

Kreg CT6066 Screw Gun & Hose Set for Framing Table Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Werkzeug Kreg CT6066 Screw Gun & Hose Set for Framing Table herunter. Kreg CT6066 Screw Gun & Hose Set for Framing Table User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Kreg CT6066 Screw Gun & Hose Set for Framing Table