Kreg PRS1200 Precision Beaded Face-Frame System Bedienungsanleitung

Beaded Face-FramePrecision SystemINSTRUCTION MANUALItem# PRS1200www.kregtool.com • [email protected] • 800.447.8638PATENT PENDINGRT12022Ver

Example #1 Example #210Basic 24”x15” face-frame. 1-1/2” stiles and rails, 5

Example #3 Example #41124”12-1/2”13”5”3” Rail1-1/2” Rail15”1-1/2” Rail3/4”7.-1

www.kregtool.com • 800.447.863812AccessoriesPrecision Router BitsPrecision Set-up BarsPrecision Router Table LiftPrecision Router Table StopMulti-Purp

THANK YOU!2Thank you and congratulations for purchasing the Kreg Precision Beaded Face-Frame System! These instructions, along with the included DVD,

Setup3Place the ¼” Button Head Screws through the face of the Sliding Base and barely thread on the ¼” nuts. Slide the fence onto the nuts and prop u

4SetupStep 5: Assemble Clamp and Router StopAssemble the integrated clamp with the long t-bolt, spacer, ¼” washer and ¼” nut, as shown at left. Once

Setup5Step 6: Attach HandleTherearetwowaystoattachyourHandle.Therstmethod,connecting your handle directly to the sliding base, is the ea

Beaded Face-Frame Fence Exploded Parts DiagramEDB6ARouter Table Stop:See Included ManualNCHIKSTWJJLLPGSliding Base

Beaded Face-Frame Fence Exploded Parts DiagramFence Hardware / Parts # Description Part # QuantityRF7 A Handle FT4029 1 B 1/4" Setup Bar

Use8Centering the FenceNotching Bit SetupNotching the StilesBegin by installing the ½” Dowel Pin in your router. Then, set your Router Stop to exactl

Use9Notching the RailsRouting the BeadSecure your Router Stop at ½” on the left side of the bit. Gently rest the workpieceagainstthestopandclamp